I have just brought a replacement drive belt and rollers for my 98 Majesty scooter. Was just wondering, as in the past i have used a impact wrench, whether this method will work on this type of scooter. Zip off the nut holding the variator on (after putting a dab of tippex so i know where to tighten it back to) replace belt and rollers then zip it back up.
Also is there anything that needs to be lubricated or greased when putting back together, as i am under the impression that it is supposed to be squeaky clean and grease free, well all the scoots i have owned in the past have been.
Thanks for your help