having trouble changing down gears. changing up ok. gear pedal does not spring back when down changing so have to realy stamp on it. Any ideas?
Fs fazer 600
Posts 10 | Views 597
Gear changing problems
Checking your clutch adjustment would be the first check I make followed by your chain tension.
What is the mileage on the bike and when was the last time the oil was changed?
fs fazer 600
milage 1s 12k, oil was changed 2k ago and chain in correct tension. How do i check clutch?
It could be a weak shift shaft spring but could be clutch drag which you don`t want changing down.
It could be the wrong type of engine oil or too much clutch lever play or a binding cable not giving full movement on the clutch arm above the gearbox.
Does the bike jolt forwards when selecting 1st gear?
Also what position is your lever when the clutch bites as in 1/4 , 1/2 , 3/4 ,way out?
fs fazer 600
Cable ok and lever at 1/2 to 3/4 bite. No jolts when selecting 1st.
Yamaha600 Fazer FS 2008
As Jaffa90 has already pointed out,its probably a shift shaft return spring problem if all is in spec,have it investigated before you do damage to the selector forks and transmission. Good Luck
I trust you are using the clutch when you change down?
Has it always been like this, or has it just started?
Do you remove the foot pressure completely after changing gear?
Is the gear lever adjusted too low, so that it's fouling something on down shifts?
Just started, remove pressure after changes and no fouling with cable or pedal.