help guys my ER6F front sprocket wont budge , tried breaker bar and battery powered impact gun , how the hell do i get it moving
Posts 5 | Views 170
this guy had exactly the same prob i have , but i havent been able to budge mine , gonna try the local garage see if they can use their air gun to budge the bugger , so damn frustrating , dont know what the hell kawasaki are thinking having the bolt on so tight
used a short section of scaffold pole ( 4ft + ) on a good socket and bar, with someone steading/holding the socket and bar in place (fingers!), lift the scarf pole, still a prob? then flick the socket 180 and lean on the fcuker.
Knowledge is knowing a tomato is a fruit
Wisdom is knowing not to put it in a fruit salad
Kawasaki sprocket nut
I did say in a previous post that it's torqued up to a million ft/lb.
When I did my ZZR600 front sprocket, I had a jack handle through the rear wheel to stop things turning, and a 6 foot scaffold pole on my breaker bar. It's a "normal" thread, so anti clockwise to undo.
Get someone to steady the bike while you do it.